Here are your top tips for using your ITZ candles to their fullest potential!
To get the best experience, we recommend following these guidelines:
- Upon first use, burn until the entire surface has turned to liquid wax. This helps prolong the life of your candle and prevents tunneling.
- Trim wick to 1/8'' before each lighting. This maintains an even and clean burn every time.
- Burn for no more than 3 hours at a time.
- Always keep candles in sight when lit. NEVER burn a candle on or near anything that can catch fire such as furniture, drapes, books, paper or any other flammable material.
- NEVER leave a burning candle unattended. Extinguish candles when leaving a room or before going to sleep. Make sure the wick amber is no longer glowing when doing so.
- Always burn candles in a well ventilated room. Do not burn too many candles at the same time in a small room or 'tight' areas of living where air exchange is limited.
- Put in areas away from drafts, open air vents or ceiling fans. This will prevent rapid burning and flare-ups.
- Be aware that candles, containers and/or wax can become hot when in use.
- Always burn candles on a stable, heat resistant surface. This can help prevent heat damage to underlaying surfaces and prevent glass containers from breaking.
- Keep out of reach of children and pets.
- Keep wax pool free from wick and other debris at all times.
- Never use a knife or sharp object to remove wax drippings from a glass holder. It might scratch, weaken, or cause the glass to break upon subsequent use.
- Extinguish a candle if it repeatedly smokes, flickers, or the flame becomes too high. The candle isn't burning properly. Cool, align and trim the wick, then check for drafts before relighting.
- Never burn a candle all the way down. Extinguish flame if it comes too close to the container.
- Extinguish candle carefully, allow it to cool completely before touching or moving.
- We recommend to use a candle snuffer to extinguish a candle. Never use water as it can cause wax to splatter or glass to break.
- Always read and follow the manufacturer's use and safety introductions carefully.